- Reduced price
- New
SAE J2979
$78.00
$35.10
Save 55%
SAE J2979 2012 Edition, May 1, 2012
Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination
of Compressive Stress Relaxation (CSR) Response
Description / Abstract:
The scope of this document is to define a test method for
performing the Compression Stress Relaxation (CSR) Test with the
Automotive Standard (ASD) CSR Jig using the appropriate test
fixtures, configurations and procedures. This standard defines the
equipment needed, guidelines for running the test, and the format
for generating the results and analyzing the data.
Purpose
This document describes test procedures and conditions for determining the loss in counter-force of a 12.7 mm (0.500 in) diameter button compressed in an ASD CSR Jig at a constant deformation, measured at room temperature at periodic intervals, after exposure to elevated temperatures and/or fluids. It is designed for testing of vulcanized rubber and thermoplastic elastomers with an instantaneous Type A Hardness from 45 to 90 (ASTM D2240). Samples are molded and cured in accordance with ASTM D3182. This document is specific to the use of the ASD CSR jig, a required apparatus list, a specific test method including a quality check for the total system. This document was developed based on testing new and aged specimens. This method can involve hazardous materials, operations and equipment. This method does not propose to address all the safety problems associated with its use. It is the responsibility of user of this method to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use
Purpose
This document describes test procedures and conditions for determining the loss in counter-force of a 12.7 mm (0.500 in) diameter button compressed in an ASD CSR Jig at a constant deformation, measured at room temperature at periodic intervals, after exposure to elevated temperatures and/or fluids. It is designed for testing of vulcanized rubber and thermoplastic elastomers with an instantaneous Type A Hardness from 45 to 90 (ASTM D2240). Samples are molded and cured in accordance with ASTM D3182. This document is specific to the use of the ASD CSR jig, a required apparatus list, a specific test method including a quality check for the total system. This document was developed based on testing new and aged specimens. This method can involve hazardous materials, operations and equipment. This method does not propose to address all the safety problems associated with its use. It is the responsibility of user of this method to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use
SAE J2979 2012 Edition, May 1, 2012
Test Method for Vulcanized Rubber and Thermoplastic Elastomer Determination
of Compressive Stress Relaxation (CSR) Response