- Reduced price
- New
SAE AIR5065
$78.00
$35.10
Save 55%
SAE AIR5065 Revision A, May 1, 2012
Influence of Grain Flow on Bolt Integrity
Description / Abstract:
1. SCOPE:
Performed tensile and fatigue tests on bolts to determine if cutting of materials flow lines at the bolt underhead would degrade bolt integrity. Five different alloys used in aerospace industry fatigue critical applications were employed to fabricate 5/16 to 1/2 inch diameter bolts. These bolts were machined from bar stock producing fully cut material flow lines under their heads. Tensile testing with and without underhead washers was performed along with industry standard fatigue testing.
Performed tensile and fatigue tests on bolts to determine if cutting of materials flow lines at the bolt underhead would degrade bolt integrity. Five different alloys used in aerospace industry fatigue critical applications were employed to fabricate 5/16 to 1/2 inch diameter bolts. These bolts were machined from bar stock producing fully cut material flow lines under their heads. Tensile testing with and without underhead washers was performed along with industry standard fatigue testing.
SAE AIR5065 Revision A, May 1, 2012
Influence of Grain Flow on Bolt Integrity