- Reduced price
- New
SAE AMS4122
$78.00
$35.10
Save 55%
SAE AMS4122 Revision L, May 1, 2012
Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings
5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651)Solution and
Precipitation Heat Treated
Description / Abstract:
Form
This specification covers an aluminum alloy in the form of rolled or cold finished bars, rods, and wire, and of flash welded rings.
Application
These products have been used typically for parts requiring high strength where limited formability is acceptable.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
This specification covers an aluminum alloy in the form of rolled or cold finished bars, rods, and wire, and of flash welded rings.
Application
These products have been used typically for parts requiring high strength where limited formability is acceptable.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
SAE AMS4122 Revision L, May 1, 2012
Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings
5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651)Solution and
Precipitation Heat Treated