- Reduced price
- New
SAE AMS4160
$78.00
$35.10
Save 55%
SAE AMS4160 Revision H, May 1, 2013
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O)
Annealed
Description / Abstract:
Form
This specification covers an aluminum alloy in the form of extruded bars, rods, wire profiles, and tubing.
Tubing
Tubing shall be additionally classified
When no Type is specified, Type I shall apply.
Application
These products have been used typically for parts requiring moderate strength, especially where such parts require brazing or welding during fabrication, and which are to be subsequently solution and precipitation heat treated, but usage is not limited to such applications. Product may also be used as stock for flash welded rings.
This specification covers an aluminum alloy in the form of extruded bars, rods, wire profiles, and tubing.
Tubing
Tubing shall be additionally classified
When no Type is specified, Type I shall apply.
Application
These products have been used typically for parts requiring moderate strength, especially where such parts require brazing or welding during fabrication, and which are to be subsequently solution and precipitation heat treated, but usage is not limited to such applications. Product may also be used as stock for flash welded rings.
SAE AMS4160 Revision H, May 1, 2013
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O)
Annealed