- Reduced price
- New
SAE AMS2469
$78.00
$35.10
Save 55%
SAE AMS2469 Revision J, February 1, 2014
Hard Anodic Coating on Aluminum and Aluminum Alloys
Description / Abstract:
Purpose
This specification establishes the requirements for a hard anodic coating on aluminum and aluminum alloys.
Application
This process has been used typically to increase, by formation of a dense aluminum oxide, surface hardness and resistance to abrasion and corrosion of aluminum and aluminum-alloy parts containing, in general, less than 5% copper or 8% silicon or a total of 8% of both, but usage is not limited to such applications. Alloys with higher alloy content can be coated satisfactorily with proper precautions in processing. Careful consideration should be given when using this process on highly-stressed parts because of the resultant marked lowering of fatigue performance and on parts with sharp corners and edges where chipping may result.
Safety - Hazardous Materials
While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.
This specification establishes the requirements for a hard anodic coating on aluminum and aluminum alloys.
Application
This process has been used typically to increase, by formation of a dense aluminum oxide, surface hardness and resistance to abrasion and corrosion of aluminum and aluminum-alloy parts containing, in general, less than 5% copper or 8% silicon or a total of 8% of both, but usage is not limited to such applications. Alloys with higher alloy content can be coated satisfactorily with proper precautions in processing. Careful consideration should be given when using this process on highly-stressed parts because of the resultant marked lowering of fatigue performance and on parts with sharp corners and edges where chipping may result.
Safety - Hazardous Materials
While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.
SAE AMS2469 Revision J, February 1, 2014
Hard Anodic Coating on Aluminum and Aluminum Alloys