- Reduced price
- New
SAE AMS7379
$78.00
$35.10
Save 55%
SAE AMS7379 2008 Edition, July 1, 2008
Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature
Sealing Tg -40 °F (-40 °C) For Elastomeric Seals in Aircraft Engine Oil,
Fuel and Hydraulics Systems
Description / Abstract:
Form
This specification covers high temperature, compression set and fluid resistant fluorocarbon elastomer material to be used in the form of O-rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications.
Application
These products have resistance to a variety of gas turbine engine oils, including high thermal stability (HTS) oils, fuels, and hydraulic fluids, but usage is not limited to such applications. Each application should be considered separately. This fluorocarbon (FKM) has a service temperature range of -60 to +400 °F (-51 to +204 °C) in air.
Safety - Hazardous Materials
While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards, which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.
This specification covers high temperature, compression set and fluid resistant fluorocarbon elastomer material to be used in the form of O-rings, compression seals, O-ring cord, and molded-in-place gaskets for aeronautical and aerospace applications.
Application
These products have resistance to a variety of gas turbine engine oils, including high thermal stability (HTS) oils, fuels, and hydraulic fluids, but usage is not limited to such applications. Each application should be considered separately. This fluorocarbon (FKM) has a service temperature range of -60 to +400 °F (-51 to +204 °C) in air.
Safety - Hazardous Materials
While the materials, methods, applications, and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards, which may be involved in such use. It is the sole responsibility of the user to ensure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.
SAE AMS7379 2008 Edition, July 1, 2008
Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature
Sealing Tg -40 °F (-40 °C) For Elastomeric Seals in Aircraft Engine Oil,
Fuel and Hydraulics Systems