- Reduced price
- New
SAE AMS5902
$78.00
$35.10
Save 55%
SAE AMS5902 Revision C, December 1, 2008
Steel, Corrosion-Resistant, Sheet and Strip 18Cr – 8Ni (SAE 30301) Cold
Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength
Description / Abstract:
Form
This specification covers a corrosion-resistant steel in the form of sheet and strip.
Application
These products have been used typically in fabrication of aircraft structural components requiring moderate forming and bending, but usage is not limited to such applications.
Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
This specification covers a corrosion-resistant steel in the form of sheet and strip.
Application
These products have been used typically in fabrication of aircraft structural components requiring moderate forming and bending, but usage is not limited to such applications.
Mechanical properties specified herein are obtained by cold working (strain hardening) and not by heat treatment. Therefore, the cold-worked product should not be heated to a temperature which adversely affects the mechanical properties or corrosion resistance before, during, or after fabrication.
SAE AMS5902 Revision C, December 1, 2008
Steel, Corrosion-Resistant, Sheet and Strip 18Cr – 8Ni (SAE 30301) Cold
Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength