- Reduced price
- New
SAE AMS4118
$78.00
$35.10
Save 55%
SAE AMS4118 Revision L, March 1, 2009
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn
- 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated
Description / Abstract:
Form
This specification covers an aluminum alloy in the form of bars, rods, and wire.
Application
These products have been used typically for parts requiring good strength and whose fabrication does not involve welding, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
This specification covers an aluminum alloy in the form of bars, rods, and wire.
Application
These products have been used typically for parts requiring good strength and whose fabrication does not involve welding, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP823 recommends practices to minimize such conditions.
SAE AMS4118 Revision L, March 1, 2009
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn
- 0.60Mg - 0.50Si (2017; -T4, -T451) Solution Heat Treated