- Reduced price
- New
SAE AMS4044
$78.00
$35.10
Save 55%
SAE AMS4044 Revision N, July 1, 2017
Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed
(7075-O) or when specified, "As Fabricated" (7075-F)
Description / Abstract:
Form
This specification covers an aluminum alloy in the form of sheet and plate from .008 to 2.000 inches, incl (0.20 to 50.80 mm, incl) in thickness, supplied in the annealed (O) condition (see 8.4).
Application
These products have been used typically for formed structural parts which will be subsequently heat treated, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP823 recommends practices to minimize such conditions.
This specification covers an aluminum alloy in the form of sheet and plate from .008 to 2.000 inches, incl (0.20 to 50.80 mm, incl) in thickness, supplied in the annealed (O) condition (see 8.4).
Application
These products have been used typically for formed structural parts which will be subsequently heat treated, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP823 recommends practices to minimize such conditions.
SAE AMS4044 Revision N, July 1, 2017
Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed
(7075-O) or when specified, "As Fabricated" (7075-F)