- Reduced price
- New
SAE AMS4976
$78.00
$35.10
Save 55%
SAE AMS4976 Revision K, July 1, 2017
Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and
Precipitation Heat Treated
Description / Abstract:
Form
This specification covers a titanium alloy in the form of forgings 3.000 inches (76.20 mm) and under in nominal diameter or least distance between parallel sides and 9 in2 (58 cm2) and under in cross-sectional area and forging stock of any size (see 8.5).
Application
These products have been used typically for parts requiring high strength and toughness and good creep resistance up to 1000 °F (538 °C), but usage is not limited to such applications.
This specification covers a titanium alloy in the form of forgings 3.000 inches (76.20 mm) and under in nominal diameter or least distance between parallel sides and 9 in2 (58 cm2) and under in cross-sectional area and forging stock of any size (see 8.5).
Application
These products have been used typically for parts requiring high strength and toughness and good creep resistance up to 1000 °F (538 °C), but usage is not limited to such applications.
Certain processing procedures and service conditions may cause these forgings to become subject to stress-corrosion cracking; ARP982 recommends practices to minimize such conditions.
SAE AMS4976 Revision K, July 1, 2017
Titanium Alloy, Forgings 6.0Al - 2.0Sn - 4.0Zr - 2.0Mo - 08Si Solution and
Precipitation Heat Treated