- Reduced price
- New
SAE AMS6952
$78.00
$35.10
Save 55%
SAE AMS6952 2018 Edition, March 1, 2018
Titanium Alloy, Forgings 5.8Al - 4.0Sn - 3.5Zr - 2.8Mo - 0.7Nb - 0.35Si -
0.06C Solution and Precipitation Heat Treated
Description / Abstract:
Form
This specification covers a titanium alloy in the form of forgings 4.400 inches (111.76 mm) and under in nominal diameter or least distance between parallel sides with a maximum cross-sectional area of 178.50 in2 (1151.6 cm2) and under and forging stock of any size (see 8.5).
Application
These products have been used typically for parts requiring high strength and toughness and good creep resistance up to 1004 °F (540 °C), but usage is not limited to such applications.
Certain processing procedures and service conditions may cause these forgings to become subject to stress corrosion cracking; ARP982 recommends practices to minimize such conditions.
This specification covers a titanium alloy in the form of forgings 4.400 inches (111.76 mm) and under in nominal diameter or least distance between parallel sides with a maximum cross-sectional area of 178.50 in2 (1151.6 cm2) and under and forging stock of any size (see 8.5).
Application
These products have been used typically for parts requiring high strength and toughness and good creep resistance up to 1004 °F (540 °C), but usage is not limited to such applications.
Certain processing procedures and service conditions may cause these forgings to become subject to stress corrosion cracking; ARP982 recommends practices to minimize such conditions.
SAE AMS6952 2018 Edition, March 1, 2018
Titanium Alloy, Forgings 5.8Al - 4.0Sn - 3.5Zr - 2.8Mo - 0.7Nb - 0.35Si -
0.06C Solution and Precipitation Heat Treated