- Reduced price
- New
SAE AMS4095
$78.00
$35.10
Save 55%
SAE AMS4095 Revision D, March 1, 2018
Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V -
0.06Ti Alclad 2219-T31; Sheet, Solution Heat Treated and Cold Worked Alclad
2219-T351; Plate, Solution Heat Treated and Stress Relieved
Description / Abstract:
Form
This specification covers an aluminum alloy in the form of alclad sheet and plate 0.020 to 0.499 inch (0.51 to 12.67 mm) inclusive, in nominal thickness (see 8.4).
Application
These products have been used typically for parts requiring high strength up to 600 °F (316 °C) and are also well suited for cryogenic applications and where welding and maximum corrosion-resistance are required, but usage is not limited to such applications.
This specification covers an aluminum alloy in the form of alclad sheet and plate 0.020 to 0.499 inch (0.51 to 12.67 mm) inclusive, in nominal thickness (see 8.4).
Application
These products have been used typically for parts requiring high strength up to 600 °F (316 °C) and are also well suited for cryogenic applications and where welding and maximum corrosion-resistance are required, but usage is not limited to such applications.
Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP823 recommends practices to minimize such conditions.
SAE AMS4095 Revision D, March 1, 2018
Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V -
0.06Ti Alclad 2219-T31; Sheet, Solution Heat Treated and Cold Worked Alclad
2219-T351; Plate, Solution Heat Treated and Stress Relieved