- Reduced price
- New
SAE AMS5620
$78.00
$35.10
Save 55%
SAE AMS5620 Revision G, September 1, 2006
Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 13Cr (0.30 -
0.40C) (SAE 51420F, 51420FSe) Free-Machining Grade
Description / Abstract:
Form
This specification covers two types of corrosion and heat resistant steel in the form of bars, wire, forgings, and forging stock.
Application
These products have been used typically for parts on which the amount of machining warrants use of a free-machining grade of steel and requiring hardness within the range of 40 to 50 HRC with corrosion resistance and oxidation resistance up to 1000 °F (538 °C), but useful at the higher temperatures only when stresses are moderately low, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking. ARP1110 recommends practices to minimize such conditions.
Classification
The steel compositions covered by this specification are classified as follows:
Type 1 - 13Cr - 0.26Se (0.30 - 0.40C)
Type 2 - 13Cr - 0.25S (0.30 - 0.40C)
Unless a specific type is ordered, either Type 1 or Type 2 may be supplied.
This specification covers two types of corrosion and heat resistant steel in the form of bars, wire, forgings, and forging stock.
Application
These products have been used typically for parts on which the amount of machining warrants use of a free-machining grade of steel and requiring hardness within the range of 40 to 50 HRC with corrosion resistance and oxidation resistance up to 1000 °F (538 °C), but useful at the higher temperatures only when stresses are moderately low, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking. ARP1110 recommends practices to minimize such conditions.
Classification
The steel compositions covered by this specification are classified as follows:
Type 1 - 13Cr - 0.26Se (0.30 - 0.40C)
Type 2 - 13Cr - 0.25S (0.30 - 0.40C)
Unless a specific type is ordered, either Type 1 or Type 2 may be supplied.
SAE AMS5620 Revision G, September 1, 2006
Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 13Cr (0.30 -
0.40C) (SAE 51420F, 51420FSe) Free-Machining Grade