- Reduced price
- New
SAE AMS2442
$78.00
$35.10
Save 55%
SAE AMS2442 Revision A, April 1, 2007
Magnetic Particle Acceptance Criteria for Parts
Description / Abstract:
Purpose
This specification establishes acceptance criteria for discontinuities revealed by magnetic particle inspection of parts made from wrought, ferromagnetic materials.
Application
These criteria are intended typically for, but not limited to, aerospace parts that require magnetic particle inspection following the completion of fabrication operations.
Classification
Five grades are listed in Table 1 to allow selection of the appropriate grade for each specific application. The engineering drawing or purchase order will normally specify the appropriate grade for each part, or in the case of a zoned drawing, the appropriate grade for each zone. When a specific acceptance grade is not specified, Grade 2 shall apply. (See 8.2).
This specification establishes acceptance criteria for discontinuities revealed by magnetic particle inspection of parts made from wrought, ferromagnetic materials.
Application
These criteria are intended typically for, but not limited to, aerospace parts that require magnetic particle inspection following the completion of fabrication operations.
Classification
Five grades are listed in Table 1 to allow selection of the appropriate grade for each specific application. The engineering drawing or purchase order will normally specify the appropriate grade for each part, or in the case of a zoned drawing, the appropriate grade for each zone. When a specific acceptance grade is not specified, Grade 2 shall apply. (See 8.2).
SAE AMS2442 Revision A, April 1, 2007
Magnetic Particle Acceptance Criteria for Parts