- Reduced price
- New
SAE AMS4128
$78.00
$35.10
Save 55%
SAE AMS4128 Revision D, October 1, 2007
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu -
0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching
Description / Abstract:
Form
This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.50 mm) and over in nominal diameter or least difference between parallel sides.
Application
These bars have been used typically for parts where moderate ductility, formability, and response to precipitation heat treatment are required and where distortion during machining must be minimized, but usage is not limited to such applications.
This specification covers an aluminum alloy in the form of bars and rods 0.500 inch (12.50 mm) and over in nominal diameter or least difference between parallel sides.
Application
These bars have been used typically for parts where moderate ductility, formability, and response to precipitation heat treatment are required and where distortion during machining must be minimized, but usage is not limited to such applications.
SAE AMS4128 Revision D, October 1, 2007
Aluminum Alloy Bars, Rolled or Cold Finished 1.0Mg - 0.60Si - 0.30Cu -
0.20Cr (6061-T451) Solution Heat Treated and Stress Relieved by Stretching